ES LD009D-CA3724-27 Constant Current LED Driver, 375mA 15-24V 9W max

Product Description 

Product	Constant Current LED Driver
Model	LD009D-CA3724-27
Input Voltage	120V AC
Input Current	0.25A
Frequency	60Hz
Output Regulated Current	375mA
Power	9W
Output Voltage Max	15-24V DC
Dimmable	Yes
Class Certification	Class II
Dimensions	60mm (2.4 in) Dia x 28mm (1.15 in) Depth
Certification

The ES LD009D-CA3724-27 is a constant current LED driver designed to power LED lighting fixtures. It has a model number of LD009D-CA3724-27 and is designed to operate on an input voltage of 120V AC with a frequency of 60Hz.

The input current of the driver is 0.25A and it is capable of delivering a regulated output current of 375mA. The maximum power output of the driver is 9W, making it suitable for use with LED lighting fixtures with power requirements up to 9 watts.

The output voltage of the driver can vary between 15-24V DC, allowing it to be used with a wide range of LED lighting fixtures that require different voltages. The driver is also dimmable, making it easy to adjust the brightness of the LED lighting fixtures as needed.

Feature:

• The ES LD009D-CA3724-27 is a constant current LED driver designed to power LED lighting fixtures.
• The driver operates on an input voltage of 120V AC with a frequency of 60Hz.
• It has an input current of 0.25A and is capable of delivering a regulated output current of 375mA.
• The maximum power output of the driver is 9W, making it suitable for use with LED lighting fixtures with power requirements up to 9 watts.
• The output voltage of the driver can vary between 15-24V DC, allowing it to be used with a wide range of LED lighting fixtures that require different voltages.
• The driver is dimmable, making it easy to adjust the brightness of the LED lighting fixtures as needed.
• It has Class II certification, making it suitable for use in locations where a grounded electrical system is not available.
• The driver has dimensions of 60mm (2.4 in) in diameter and 28mm (1.15 in) in depth, making it compact and easy to install in tight spaces.

How to Install ES LD009D-CA3724-27 Dimming Constant Current LED Driver?

1. Turn off the power: Before installing the LED driver, make sure to turn off the power to the circuit from the circuit breaker or the main electrical panel.

2. Choose the installation location: Select a suitable location to mount the driver. The location should be dry and free from any heat sources.

3. Mount the driver: Use screws to mount the driver on a solid surface.

4. Connect the input wires: Connect the input wires from the driver to the AC power source. Make sure to match the correct wires (hot and neutral) from the driver to the corresponding wires from the power source. (Blue color wire to Neutral (N) and the Brown color Wire to Line (L))

5. Connect the output wires: Connect the output wires from the driver to the LED lighting fixture. Make sure to match the correct wires (positive and negative) from the driver to the corresponding wires from the fixture. ( Red color wire to the positive (+) and Black wire to the negative (-))

6. Test the installation: Once the connections are made, turn on the power to the circuit and test the LED fixture to ensure it is working properly.

7. Adjust dimming settings: If the driver is dimmable, follow the manufacturer's instructions to connect the dimming wires and adjust the dimming settings as required.

Note: It's important to follow the specific instructions provided by the manufacturer for your LED driver, as installation procedures may vary based on the model and manufacturer. If you are not comfortable with electrical installations, it is recommended to consult a licensed electrician for assistance.