OTTIMA OTM-TD20 Constant Current LED Driver, 1120mA 10-15V 16.8W

  • $37.00 USD
    Prix unitaire par 
Frais de port calculés à l'étape de paiement.
SKU: 666561424909
Title:
Seulement 99 restant!

Free shipping on orders over $99 USD (Check availability during checkout).


Product Description 

Product Constant Current LED Driver
Model OTM-TD20
Input Voltage 90-130V AC
Input Current 0.24A
Input Frequency 48-62Hz
Power Factor PF>0.95
Efficiency >85%
Output Regulated Current 1120mA
Output max Power 16.8W
Output Max Voltage 10-15V DC
Dimmable Yes (Triac Dimming)
Ambient Temperature (Ta) 40°C
Case Temperature (Tc) 90°C
IP Rating IP20 (Indoor use only)
Dimensions 94 x 36 x 18.5 mm (3.7 x 1.42 x 0.72 in)
Class Certification Class II
Certification
 

 

The OTTIMA OTM-TD20 is a constant current LED driver designed for indoor use only, with an IP20 rating. It has an input voltage range of 90-130V AC, input current of 0.24A, and input frequency of 48-62Hz. The power factor is greater than 0.95 and efficiency is greater than 85%.

The driver is capable of providing a regulated output current of 1120mA and maximum power of 16.8W. The output voltage range is 10-15V DC. It is dimmable with Triac Dimming, which allows the user to adjust the light intensity.

Features:

  • The OTTIMA OTM-TD20 is a constant current LED driver designed for indoor use only, with an IP20 rating.
  • Input voltage range: 90-130V AC, input current: 0.24A, and input frequency: 48-62Hz.
  • Power factor is greater than 0.95 and efficiency is greater than 85%.
  • Regulated output current: 1120mA and maximum power: 16.8W.
  • Output voltage range: 10-15V DC.
  • Dimmable with Triac Dimming for adjusting light intensity.
  • Maximum ambient temperature (Ta): 40°C and case temperature (Tc): 90°C.
  • Dimensions: 94 x 36 x 18.5 mm (3.7 x 1.42 x 0.72 in).
  • Classified as Class II, which means it has two layers of insulation protection.
  • Compact and efficient LED driver suitable for indoor use.

How to Install OTTIMA OTM-TD20 Dimming Constant Current LED Driver?

  1. Ensure that the power is turned off.
  2. Verify the output current of both the light and the driver.
  3. Remove the caps on both sides and loosen the screws on the green terminals.
  4. Attach the AC wires to the terminals labeled Line (L) and Neutral (N).
  5. Connect the positive wire of the light to V+ and the negative wire to V-.

Nous vous recommandons également