OTTIMA OTM-TD9 Constant Current LED Driver, 190mA 24-48V 9W

  • $28.00 USD
    Prix unitaire par 
Frais de port calculés à l'étape de paiement.
SKU: 666561424855
Seulement 98 restant!

Free shipping on orders over $99 USD (Check availability during checkout).

 Product Description 

Product Constant Current LED Driver
Model OTM-TD9
Input Voltage 90-130V AC
Input Current 0.1A
Input Frequency 48-62Hz
Power Factor PF>0.95
Efficiency >85%
Output Regulated Current 190mA
Output max Power 9W
Output Max Voltage 24-48V DC
Dimmable Yes (Triac Dimming)
Ambient Temperature (Ta) 40°C
Case Temperature (Tc) 90°C
IP Rating IP20 (Indoor use only)
Dimensions 94 x 36 x 18.5 mm (3.7 x 1.42 x 0.72 in)
Class Certification Class II


The OTTIMA OTM-TD9 Constant Current LED Driver is an electronic device that supplies a regulated constant current to LED lights. The model number of this driver is OTM-TD9. It has an input voltage range of 90-130V AC with an input current of 0.1A and a frequency range of 48-62Hz. It has a high power factor (PF) of greater than 0.95, which means it is highly efficient in converting the input power to output power. The efficiency of this LED driver is greater than 85%.

The output regulated current of this LED driver is 190mA, and its maximum output power is 9W. The maximum voltage range of the output is 24-48V DC. It is dimmable with Triac Dimming, which allows for control of the brightness of the LED lights. The LED driver has an ambient temperature (Ta) of 40°C and a case temperature (Tc) of 90°C.


  • The OTTIMA OTM-TD9 Constant Current LED Driver is an electronic device that regulates the current to LED lights
  • Model number: OTM-TD9, input voltage range: 90-130V AC, input current: 0.1A, frequency range: 48-62Hz
  • High power factor (PF) > 0.95, efficiency > 85%
  • Output regulated current: 190mA, maximum output power: 9W, maximum voltage range: 24-48V DC
  • Dimmable with Triac Dimming
  • Ambient temperature (Ta): 40°C, case temperature (Tc): 90°C
  • IP20 rated for indoor use only
  • Compact size: 94 x 36 x 18.5 mm (3.7 x 1.42 x 0.72 in)
  • Class II certified for double insulation, no grounding wire required
  • Reliable and efficient for powering LED lights in indoor settings.

How to Install OTTIMA OTM-TD9 Dimming Constant Current LED Driver?

  1. Ensure that the power is turned off.
  2. Verify the output current of both the light and the driver.
  3. Remove the caps on both sides and loosen the screws on the green terminals.
  4. Attach the AC wires to the terminals labeled Line (L) and Neutral (N).
  5. Connect the positive wire of the light to V+ and the negative wire to V-.

Nous vous recommandons également