OTTIMA OTM-TD20 Constant Current LED Driver, 430mA 36-42V 18W
|Product||Constant Current LED Driver|
|Input Voltage||90-130V AC|
|Output Regulated Current||430mA|
|Output max Power||18W|
|Output Max Voltage||36-42V DC|
|Dimmable||Yes (Triac Dimming)|
|Ambient Temperature (Ta)||40°C|
|Case Temperature (Tc)||90°C|
|IP Rating||IP20 (Indoor use only)|
|Dimensions||94 x 36 x 18.5 mm (3.7 x 1.42 x 0.72 in)|
|Class Certification||Class II|
The OTTIMA OTM-TD20 is a constant current LED driver that provides a regulated output current of 430mA and a maximum output power of 18W, making it suitable for powering LED lights within this range. It has an input voltage range of 90-130V AC with an input current of 0.24A and input frequency of 48-62Hz, making it compatible with standard electrical systems.
This LED driver has a high power factor of greater than 0.95, indicating that it is highly efficient in converting electrical power into LED light output. It also has an efficiency rating of over 85%, meaning that it minimizes power loss during the conversion process.
The output voltage of the OTM-TD20 is between 36-42V DC, allowing it to power a wide range of LED lights within that voltage range. It is also dimmable using Triac Dimming, allowing for adjustable lighting intensity.
The driver is designed for indoor use only, with an IP20 rating for protection against solid objects greater than 12.5mm in diameter. It can operate in ambient temperatures of up to 40°C and has a maximum case temperature of 90°C.
The OTM-TD20 has dimensions of 94 x 36 x 18.5mm (3.7 x 1.42 x 0.72 in) and is classified as Class II, indicating that it has double insulation for added safety.
Note: Never use constant voltage driver instead of constant current driver, even if Voltage and mA are equal.
How to Install OTTIMA OTM-TD20 Dimming Constant Current LED Driver?
- Ensure that the power is turned off.
- Verify the output current of both the light and the driver.
- Remove the caps on both sides and loosen the screws on the green terminals.
- Attach the AC wires to the terminals labeled Line (L) and Neutral (N).
- Connect the positive wire of the light to V+ and the negative wire to V-.
Nous vous recommandons également
ES LD015D-CA04736-15 Constant Current LED Driver, 470mA 36V 16.8W Max
2inch Round Disc LED Module DIS 02-007W-930-120-S1-Z1A , 120V 7W 3000K(Warm White)