OTTIMA OTM-TD20 Constant Current LED Driver, 470mA 24-36V 16.8W

Product Description

Product	Constant Current LED Driver
Model	OTM-TD20
Input Voltage	90-130V AC
Input Current	0.24A
Input Frequency	48-62Hz
Power Factor	PF>0.95
Efficiency	>85%
Output Regulated Current	470mA
Output Power	16.8W
Output Voltage	24-36V DC
Dimmable	Yes (Triac Dimming)
Ambient Temperature (Ta)	40°C
Case Temperature (Tc)	90°C
IP Rating	IP20 (Indoor use only)
Dimensions	94 x 36 x 18.5 mm (3.7 x 1.42 x 0.72 in)
Class Certification	Class II
Certification

The OTTIMA OTM-TD20 is a constant current LED driver designed for indoor use only, with an IP20 rating. It has an input voltage range of 90-130V AC, input current of 0.24A, and input frequency of 48-62Hz. The power factor is greater than 0.95 and efficiency is greater than 85%.

The driver is capable of providing a regulated output current of 470mA and maximum power of 16.8W. The output voltage range is 24-36V DC. It is dimmable with Triac Dimming, which allows the user to adjust the light intensity.

Features:

• The OTTIMA OTM-TD20 is a constant current LED driver designed for indoor use only, with an IP20 rating.
• Input voltage range: 90-130V AC, input current: 0.24A, and input frequency: 48-62Hz.
• Power factor is greater than 0.95 and efficiency is greater than 85%.
• Regulated output current: 470mA and maximum power: 16.8W.
• Output voltage range: 24-36V DC.
• Dimmable with Triac Dimming for adjusting light intensity.
• Maximum ambient temperature (Ta): 40°C and case temperature (Tc): 90°C.
• Dimensions: 94 x 36 x 18.5 mm (3.7 x 1.42 x 0.72 in).
• Classified as Class II, which means it has two layers of insulation protection.
• Compact and efficient LED driver suitable for indoor use.
• Output current and voltage ranges make it suitable for powering LED lights with specific requirements, such as those with a voltage range of 24-36V DC and a maximum current of 470mA.

How to Install OTTIMA OTM-TD20 Dimming Constant Current LED Driver?

1. Ensure that the power is turned off.
2. Verify the output current of both the light and the driver.
3. Remove the caps on both sides and loosen the screws on the green terminals.
4. Attach the AC wires to the terminals labeled Line (L) and Neutral (N).
5. Connect the positive wire of the light to V+ and the negative wire to V-.