Product Description

Product	Constant Current LED Driver
Model	LD009H-CU03724-M9E
Input Voltage	110-277V AC
Input Current	120-50mA
Frequency	50/60Hz
Output Voltage	15-24V DC
Output Regulated Current	375mA
Output Power	9W max
Dimmable	Yes
Dimensions	70 x 25 x 34.5mm (2.75 x 0.98 x 1.35 in)
Class Certification	Class 2/ Class II
Certification

The ES LD009H-CU03724-M9E is a constant current LED driver designed to power LED lighting fixtures. It has a model number of LD009H-CU03724-M9E and is designed to operate on an input voltage range of 110-277V AC with a frequency of 50/60Hz. The driver has an input current of 120-50mA.

The driver has a regulated output current of 375mA with a maximum output power of 9W, making it suitable for use with LED lighting fixtures with power requirements up to 9 watts. The output voltage of the driver can vary between 15-24V DC, allowing it to be used with a wide range of LED lighting fixtures that require different voltages.

The driver is also dimmable, making it easy to adjust the brightness of the LED lighting fixtures as needed. It has Class 2/Class II certification, indicating that it is designed for use in locations where a grounded electrical system is not available.

Features:

• The ES LD009H-CU03724-M9E is a constant current LED driver.
• It has a model number of LD009H-CU03724-M9E.
• It is designed to operate on an input voltage range of 110-277V AC with a frequency of 50/60Hz.
• The driver has an input current of 120-50mA.
• The driver has a regulated output current of 375mA with a maximum output power of 9W.
• It is suitable for use with LED lighting fixtures with power requirements up to 9 watts.
• The output voltage of the driver can vary between 15-24V DC.
• It is dimmable, making it easy to adjust the brightness of the LED lighting fixtures.
• It has Class 2/Class II certification.
• The driver has dimensions of 70 x 25 x 34.5mm (2.75 x 0.98 x 1.35 in).
• It is compact and easy to install in tight spaces.
• The ES LD009H-CU03724-M9E constant current LED driver is an efficient and reliable solution for powering LED lighting fixtures in a variety of applications.

How to Install ES LD009H-CU03724-M9E Dimming Constant Current LED Driver?

1. Turn off the power: Before installing the LED driver, make sure to turn off the power to the circuit from the circuit breaker or the main electrical panel.

2. Choose the installation location: Select a suitable location to mount the driver. The location should be dry and free from any heat sources.

3. Mount the driver: Use screws to mount the driver on a solid surface.

4. Connect the input wires: Connect the input wires from the driver to the AC power source. Make sure to match the correct wires (hot and neutral) from the driver to the corresponding wires from the power source. (Blue color wire to Neutral (N) and the Brown color Wire to Line (L))

5. Connect the output wires: Connect the output wires from the driver to the LED lighting fixture. Make sure to match the correct wires (positive and negative) from the driver to the corresponding wires from the fixture. ( Red color wire to the positive (+) and Black wire to the negative (-))

6. Test the installation: Once the connections are made, turn on the power to the circuit and test the LED fixture to ensure it is working properly.

7. Adjust dimming settings: If the driver is dimmable, follow the manufacturer's instructions to connect the dimming wires and adjust the dimming settings as required.

Note: It's important to follow the specific instructions provided by the manufacturer for your LED driver, as installation procedures may vary based on the model and manufacturer. If you are not comfortable with electrical installations, it is recommended to consult a licensed electrician for assistance.