ES LD012D-CA03536-26 Constant Current LED Driver, 350mA 21-36V 12W max
Product Description
Product | Constant Current LED Driver |
Model | LD012D-CA03536-26 |
Input Voltage | 120V AC |
Input Current | 0.2A |
Frequency | 60Hz |
Power Factor | P.F>0.9 |
Output Regulated Current | 350mA |
Output Power | 12W |
Output Voltage |
21-36V DC |
Dimmable | Yes |
Diameter | 67mm (2.63 inches) |
Depth | 27mm (1.06 in) |
Class Certification | Class II |
Certifications |
![]() ![]() ![]() |
The ES LD012D-CA03536-26 Constant Current LED Driver is a product that is used to power and control LED lights. The driver has an input voltage of 120V AC and input current of 0.2A, and operates at a frequency of 60Hz. With a power factor of P.F>0.9, the driver is designed to be energy-efficient and minimize power loss.
The output of the driver is a regulated current of 350mA, which is suitable for driving LED lights with a voltage range of 21-36V DC. The maximum output power of the driver is 12W. The driver is also dimmable, allowing for customizable lighting settings.
The driver has a compact circular design with a diameter of 67mm (2.63 inches) and a depth of 27mm (1.06 in), making it easy to install in a variety of fixtures. The driver is classified as Class II, meaning that it has additional safety features such as double insulation for protection against electrical shock.
Note: Never use constant voltage driver instead of constant current driver, even if Voltage and mA are equal.
Features:
- The ES LD012D-CA03536-26 Constant Current LED Driver is used for powering and controlling LED lights.
- It has an input voltage of 120V AC and input current of 0.2A, and operates at a frequency of 60Hz.
- The driver has a power factor of P.F>0.9 for energy efficiency and minimal power loss.
- The output is a regulated current of 350mA, suitable for LED lights with a voltage range of 21-36V DC.
- The driver is dimmable for customizable lighting settings.
- It has a compact circular design with a diameter of 67mm (2.63 inches) and a depth of 27mm (1.06 in).
- The driver is classified as Class II, providing additional safety features such as double insulation.
How to Install ES LD012D-CA03536-26 Dimming Constant Current LED Driver?
-
Turn off the power: Before installing the LED driver, make sure to turn off the power to the circuit from the circuit breaker or the main electrical panel.
-
Choose the installation location: Select a suitable location to mount the driver. The location should be dry and free from any heat sources.
-
Mount the driver: Use screws to mount the driver on a solid surface.
-
Connect the input wires: Connect the input wires from the driver to the AC power source. Make sure to match the correct wires (hot and neutral) from the driver to the corresponding wires from the power source. (White color wire to Neutral (N) and the Black color Wire to Line (L))
-
Connect the output wires: Connect the output wires from the driver to the LED lighting fixture. Make sure to match the correct wires (positive and negative) from the driver to the corresponding wires from the fixture. ( Red color wire to the positive (+) and Black wire to the negative (-))
-
Test the installation: Once the connections are made, turn on the power to the circuit and test the LED fixture to ensure it is working properly.
-
Adjust dimming settings: If the driver is dimmable, follow the manufacturer's instructions to connect the dimming wires and adjust the dimming settings as required.
Note: It's important to follow the specific instructions provided by the manufacturer for your LED driver, as installation procedures may vary based on the model and manufacturer. If you are not comfortable with electrical installations, it is recommended to consult a licensed electrician for assistance.