ES LD024D-CA05048-15 Constant Current LED Driver, 500mA 48V 24W
|Constant Current LED Driver
|Output Regulated Current
|Class 2/ Class II
|85 x 55 x 35 mm (3.5 x 2.25 x 1.4 in)
The ES LD024D-CA05048-15 is a constant current LED driver that is designed to provide reliable and efficient power to LED lighting fixtures. This model has an input voltage rating of 120V AC and an input current of 0.2A with a frequency rating of 60Hz. The driver has a regulated output current of 500mA, providing a stable and constant current supply to connected LED lights.
This driver model can deliver a maximum output power of 24W and an output voltage of 48V DC, which is ideal for powering high-power LED lighting systems. The driver is also dimmable, allowing users to adjust the brightness of their lighting as needed.
- The ES LD024D-CA05048-15 is a constant current LED driver designed for LED lighting fixtures.
- It has an input voltage rating of 120V AC and an input current of 0.2A with a frequency rating of 60Hz.
- The driver has a regulated output current of 500mA, providing a stable and constant current supply to connected LED lights.
- It can deliver a maximum output power of 24W and an output voltage of 48V DC, making it ideal for high-power LED lighting systems.
- The driver is dimmable, allowing users to adjust the brightness of their lighting as needed.
- The LD024D-CA05048-15 is certified as Class 2/Class II, meeting safety standards for use in low-voltage lighting systems.
- Overall, it is a reliable and efficient solution for powering LED lighting systems and ensuring safe and efficient operation of connected LED lighting fixtures.
How to Install ES LD024D-CA05048-15 Dimming Constant Current LED Driver?
Turn off the power: Before installing the LED driver, make sure to turn off the power to the circuit from the circuit breaker or the main electrical panel.
Choose the installation location: Select a suitable location to mount the driver. The location should be dry and free from any heat sources.
Mount the driver: Use screws to mount the driver on a solid surface.
Connect the input wires: Connect the input wires from the driver to the AC power source. Make sure to match the correct wires (hot and neutral) from the driver to the corresponding wires from the power source. (White color wire to Neutral (N) and the Black color Wire to Line (L))
Connect the output wires: Connect the output wires from the driver to the LED lighting fixture. Make sure to match the correct wires (positive and negative) from the driver to the corresponding wires from the fixture. ( Red color wire to the positive (+) and Black wire to the negative (-))
Test the installation: Once the connections are made, turn on the power to the circuit and test the LED fixture to ensure it is working properly.
Adjust dimming settings: If the driver is dimmable, follow the manufacturer's instructions to connect the dimming wires and adjust the dimming settings as required.
Note: It's important to follow the specific instructions provided by the manufacturer for your LED driver, as installation procedures may vary based on the model and manufacturer. If you are not comfortable with electrical installations, it is recommended to consult a licensed electrician for assistance.
Nous vous recommandons également
CDAC-20-30135-120V-30 COB Paragon LED Module with GPH48135AC LED Holder, 120V 6W 3000K (Warm White)
2 inch Round Disc ZEGA LED Module DIS 02-007W-930-120-S1-Z1A , 120V 7W 3000K(Warm White)
ES LD015D-CA04736-15 Constant Current LED Driver, 470mA 36V 16.8W Max