OTTIMA OTM-TD20 Constant Current LED Driver, 1250mA 8-12V 15W

 Product Description 

Product	Constant Current LED Driver
Model	OTM-TD20
Input Voltage	90-130V AC
Input Current	0.24A
Input Frequency	48-62Hz
Power Factor	PF>0.95
Efficiency	>85%
Output Regulated Current	1250mA
Output Power	15W
Output Voltage	8-12V DC
Dimmable	Yes (Triac Dimming)
Ambient Temperature (Ta)	40°C
Case Temperature (Tc)	90°C
IP Rating	IP20 (Indoor use only)
Dimensions	94 x 36 x 18.5 mm (3.7 x 1.42 x 0.72 in)
Class Certification	Class II
Certification

The OTTIMA OTM-TD20 is a Constant Current LED Driver designed to power LED lights with a regulated output current of 1250mA and output power of 15W. It has an input voltage range of 90-130V AC, input current of 0.24A, and input frequency of 48-62Hz. The driver has a high power factor of PF>0.95 and efficiency of over 85%. It is also dimmable using Triac dimming technology.

The output voltage range of the OTM-TD20 driver is 8-12V DC. The ambient temperature rating is 40°C and the case temperature rating is 90°C. The driver is designed for indoor use only and has an IP20 rating. The dimensions of the driver are 94 x 36 x 18.5 mm (3.7 x 1.42 x 0.72 in) and it has a Class II certification.

Features:

• The OTTIMA OTM-TD20 is a Constant Current LED Driver designed to power LED lights with a regulated output current of 1250mA and output power of 15W.
• The driver has an input voltage range of 90-130V AC, input current of 0.24A, and input frequency of 48-62Hz.
• The driver has a high power factor of PF>0.95 and efficiency of over 85%.
• The driver is dimmable using Triac dimming technology.
• The output voltage range of the OTM-TD20 driver is 8-12V DC.
• The ambient temperature rating of the driver is 40°C and the case temperature rating is 90°C.
• The driver is designed for indoor use only and has an IP20 rating.
• The dimensions of the driver are 94 x 36 x 18.5 mm (3.7 x 1.42 x 0.72 in).
• The driver has a Class II certification.

How to Install OTTIMA OTM-TD20 Dimming Constant Current LED Driver?

1. Ensure that the power is turned off.
2. Verify the output current of both the light and the driver.
3. Remove the caps on both sides and loosen the screws on the green terminals.
4. Attach the AC wires to the terminals labeled Line (L) and Neutral (N).
5. Connect the positive wire of the light to V+ and the negative wire to V-.