OTM-TD252500-280 Constant Current LED Driver, 280mA 24-48V 12W Dimmable
Product Description
| Product | Constant Current LED Driver |
| Model | OTM-TD252500-280 |
| Input Voltage | 90-130V AC |
| Input Current | 0.9A |
| Input Frequency | 50-60Hz |
| Power Factor | PF>0.95 |
| Efficiency | >85% |
| Output Regulated Current | 280mA |
| Output Power | 12W |
| Output Voltage | 24-48V DC |
| Dimmable | Yes (Triac Dimming) |
| Ambient Temperature (Ta) | 40°C |
| Case Temperature (Tc) | 90°C |
| IP Rating | IP20 (Dry and Damp Locations) |
| Dimensions | 88mm x 38mm x 20.75mm(3.45in x 1.5in x 0.8in) |
| Class Certification | Class 2 |
| Certification |
 
|
The OTM-TD252500-280 Constant Current LED Driver is a product designed to provide a regulated current of 280mA and an output power of 12W for LED lighting applications. The input voltage range is between 90-130V AC and the input current is 0.9A with a power factor greater than 0.95 and efficiency above 85%. The output voltage range is between 24-48V DC, and the driver is dimmable with triac dimming.
The driver has an ambient temperature rating of 40°C and a case temperature rating of 90°C, and is suitable for use in dry and damp locations with an IP20 rating. It has dimensions of 88mm x 38mm x 20.75mm (3.45in x 1.5in x 0.8in) and is certified as Class 2.
Note: Never use constant voltage driver instead of constant current driver, even if Voltage and mA are equal.
Features:
- Designed for LED lighting applications
- Provides regulated current of 280mA and output power of 12W
- Input voltage range: 90-130V AC, input current: 0.9A
- Power factor > 0.95, efficiency > 85%
- Output voltage range: 24-48V DC
- Dimmable with triac dimming
- Ambient temperature rating: 40°C, case temperature rating: 90°C
- Suitable for use in dry and damp locations with IP20 rating
- Dimensions: 88mm x 38mm x 20.75mm (3.45in x 1.5in x 0.8in)
- Certified as Class 2 product
How to Install OTM-TD252500-280 Dimming Constant Current LED Driver?
- Ensure that the power is turned off.
- Verify the output current of both the light and the driver.
- Remove the caps on both sides and loosen the screws on the green terminals.
- Attach the AC wires to the terminals labeled Line (L) and Neutral (N).
- Connect the positive wire of the light to V+ and the negative wire to V-.
