OTM-TD252800-480-18 Constant Current LED Driver, 480mA 24-30V 18W Dimmable
|Product||Constant Current LED Driver|
|Input Voltage||90-130V AC|
|Output Regulated Current||480mA|
|Output Voltage||24-48V DC|
|Dimmable||Yes (Triac Dimming)|
|Ambient Temperature (Ta)||40°C|
|Case Temperature (Tc)||90°C|
|IP Rating||IP20 (Dry and Damp Locations)|
|Dimensions||88mm x 38mm x 20.75mm
(3.45in x 1.5in x 0.8in)
|Class Certification||Class 2|
The OTM-TD252800-480-18 is a Constant Current LED Driver designed for use in dry and damp locations with an input voltage of 90-130V AC and input current of 0.9A. It has a power factor of PF>0.95 and an efficiency of >85%. The output regulated current is 480mA with an output power of 18W and an output voltage range of 24-48V DC. This driver is also dimmable with Triac dimming. The ambient temperature (Ta) is 40°C with a case temperature (Tc) of 90°C. The IP Rating is IP20 and it has dimensions of 88mm x 38mm x 20.75mm (3.45in x 1.5in x 0.8in). It has Class 2 certification.
Note: Never use constant voltage driver instead of constant current driver, even if Voltage and mA are equal.
How to Install OTM-TD252800-480-18 Dimming Constant Current LED Driver?
- Ensure that the power is turned off.
- Verify the output current of both the light and the driver.
- Remove the caps on both sides and loosen the screws on the green terminals.
- Attach the AC wires to the terminals labeled Line (L) and Neutral (N).
- Connect the positive wire of the light to V+ and the negative wire to V-.
Nous vous recommandons également
ES LD015D-CA04736-15 Constant Current LED Driver, 470mA 36V 16.8W Max
2inch Round Disc LED Module DIS 02-007W-930-120-S1-Z1A , 120V 7W 3000K(Warm White)