ES LD027D-CA06542-M28F Constant Current LED Driver, 650mA 27-42V 27W max
|Product||Constant Current LED Driver|
|Input Voltage||120V AC|
|Output Regulated Current||650mA|
|Output Power||27.3W max|
|Dimensions||87.3 x 40.8 x 30.4mm (3.4x1.6x1.2 in)|
|Class Certification||Class 2|
The ES LD027D-CA06542-M28F is a constant current LED driver designed to power LED lighting systems with a regulated current of 650mA and an output voltage range of 27-42V DC. The input voltage of this driver is 120V AC with a frequency of 60Hz and an input current of 0.35A.
This LED driver is capable of delivering a maximum power output of 27.3 watts and is also dimmable, providing flexibility in lighting control. The driver is compact in size, measuring 87.33 x 40.88 x 30.4mm (3.4x1.6x1.2 in), making it suitable for use in tight spaces.
The ES LD027D-CA06542-M28F driver is classified as Class 2, which means it meets safety standards for low voltage systems. This driver is suitable for use in a variety of LED lighting applications, including indoor and outdoor lighting systems.
Note: Never use constant voltage driver instead of constant current driver, even if Voltage and mA are equal.
- The ES LD027D-CA06542-M28F is a constant current LED driver designed for LED lighting systems.
- The driver provides a regulated output current of 650mA and an output voltage range of 27-42V DC.
- It accepts an input voltage of 120V AC at a frequency of 60Hz, with an input current of 0.35A.
- The maximum power output of the driver is 27.3 watts, and it is also dimmable.
- The driver is compact, measuring 87.33 x 40.88 x 30.4mm (3.4x1.6x1.2 in), and is classified as Class 2 for safety.
- It is suitable for use in a variety of LED lighting applications, including indoor and outdoor lighting systems.
How to Install ES LD027D-CA06542-M28F Dimming Constant Current LED Driver?
Turn off the power: Before installing the LED driver, make sure to turn off the power to the circuit from the circuit breaker or the main electrical panel.
Choose the installation location: Select a suitable location to mount the driver. The location should be dry and free from any heat sources.
Mount the driver: Use screws to mount the driver on a solid surface.
Connect the input wires: Connect the input wires from the driver to the AC power source. Make sure to match the correct wires (hot and neutral) from the driver to the corresponding wires from the power source. (White color wire to Neutral (N) and the Black color Wire to Line (L))
Connect the output wires: Connect the output wires from the driver to the LED lighting fixture. Make sure to match the correct wires (positive and negative) from the driver to the corresponding wires from the fixture. ( Red color wire to the positive (+) and Black wire to the negative (-))
Test the installation: Once the connections are made, turn on the power to the circuit and test the LED fixture to ensure it is working properly.
Adjust dimming settings: If the driver is dimmable, follow the manufacturer's instructions to connect the dimming wires and adjust the dimming settings as required.
Note: It's important to follow the specific instructions provided by the manufacturer for your LED driver, as installation procedures may vary based on the model and manufacturer. If you are not comfortable with electrical installations, it is recommended to consult a licensed electrician for assistance.
We Also Recommend
CDAC-20-30135-120V-30 COB Paragon LED Module with GPH48135AC LED Holder, 120V 6W 3000K (Warm White)
2 inch Round Disc ZEGA LED Module DIS 02-007W-930-120-S1-Z1A , 120V 7W 3000K(Warm White)
ES LD015D-CA04736-15 Constant Current LED Driver, 470mA 36V 16.8W Max